Unclog the Toilet Get a toilet plunger, and align it over the hole in the center of the toilet. However, keep an eye on the bowl and make sure that no overflow occurs. Step 5: Remove Excess Water Most of the time, toilet overflow is caused by blockages in the drain.Yipes! If you ever find yourself in this situation, don&39;t fret. Step 7: Test Your Toilet Turn the water valve back on and keep an eye on the toilet bowl. Look for the chain attached to the floater, and make sure that it is not broken or tangled, either. If it happens again, lift ball valve for water tank up the floater once more and turn off the toilet&39;s water valve.

Fix the Floater Adjust the floater mechanism so that the floater sits much lower in the toilet tank. Once its back to normal, it should be safe to let go of the floater. Here&39;s how.Turn Off the Water Valve Most toilets have a supply line that should be located around the bottom part of the bowl. Then, push down slowly to apply light pressure.. You can flush it back down the toilet once youve fixed the toilet. However, if more than one toilet is affected, your whole systems drain may be clogged. If the water is clean, pour that excess water into the sink.

This ensures that the tank will fill with less water, preventing any future overflows. Lift the floater high enough to make the water stop running. If the water level goes back to normal, then you&39;ve solved the problem. If you have more than one toilet in your home, take some time to check if the other toilets are overflowing as well. Gradually pick up the pace, pushing down harder each time, until you dislodge whatever is blocking the drain. If it doesn&39;t, it may be time to call in a professional plumbing service in Sydney. If only one toilet has the issue, then it should be an isolated incident. Take Off the Tank Cover The first thing you should do is to press down on the flapper valve, a rubber piece at the bottom center of the tank.

Once you spot the valve, turn it off as quickly as possible. Step 4: Watch the Bowl The water level should start to drop slowly but surely. If you can&39;t seem to find the valve in time, move on to the next best thing you can do. If it looks like you have overflowing toilet plumbing, consider asking help from a Sydney plumber to fix it all up. Next, look for the floater, which usually looks like a plastic ball or cup. With some quick thinking, you can stop your toilet from overflowing before it&39;s too late, even without any Sydney plumbing experts in sight. First, put on your rubber gloves and remove the excess water using a small cup or bucket. If it&39;s dirty, keep it in a plastic bucket in the meantime.